产品名称:BK PRECISION 2555示波器
产品型号:
更新时间:2024-08-18
产品简介:
美国BK PRECISION 2555示波器中国电子行业仪器优质供应商——上海坚融实业有限公司JETYOO INDUSTRIAL & 坚友(上海)测量仪器有限公司JETYOO INSTRUMENTS,专业为中国区用户提供
中国电子行业仪器优质供应商——上海坚融实业有限公司JETYOO INDUSTRIAL & 坚友(上海)测量仪器有限公司JETYOO INSTRUMENTS,专业为中国区用户提供美国BK PRECISION 2555示波器,100 MHz,2 GSa/s数位储存示波器
美国BK PRECISION示波器规格说明
Models 2552 2553 2554 2555
Bandwidth 70MHz 70MHz 100MHz 100MHz
Channels 2 4 2 4
Models 2556 2557 2558 2559
Bandwidth 200MHz 200MHz 300MHz 300MHz
Channels 2 4 2 4
美国BK PRECISION 2555示波器,70 MHz to 300 MHz,2 GSa/s数位储存示波器产品说明
BK 2550系列提供高效能、高价值的两信道及四信道数位储存示波器。具有70MHz到300MHz的频宽及2GSa/s的取样率,此系列提供每个信道24kpts的波形內存、32种自动测量值、进阶的触发能力、数学运算功能并提供标准LAN及USB界面。
频宽高达300MHz
2GSa/s取样率
四信道撷取(限定机型)
7寸宽屏幕彩色显示器
快速傅立叶转换包含加、减、乘、除四个数学运算功能
32种自动测量功能
标准USB界面可做远端电脑控制
前板USB端口可插入USB随身碟来储存及呼叫波形设定、波形数据及屏幕撷取
可经由EasyScope软件做电脑端控制
进阶功能包含可调整限制值的数位滤波器、pass/fail测试及波形记录模式
具备多国语言使用界面及辅助说明
美国BK PRECISION示波器规格参数
The 2550 series digital storage oscilloscopes deliver performance and value in 2-channel and 4-channel configurations. With bandwidth from 70 MHz to 300 MHz and 2 GSa/s sample rates, these oscilloscopes offer 24 kpts/Ch waveform memory, 32 automatic measurements, and advanced triggering capabilities including math functions. Engineered to allow you to see more of your signal under test, the 2550 series’ widescreen 7” TFT display offers a significantly larger viewing area than typical economy oscilloscopes (5.7”).
Bandwidth up to 300 MHz
2 GSa/s sample rate
4-channel acquisition (on select models)
Large 7" widescreen color display
32 automatic measurements
FFT plus four additional math functions
Built-in context sensitive help system
50 Ω input coupling
PC software that lets you remoy control the oscilloscope and capture, save, and analyze waveform data
Front and rear panel USB host port for convenient storing and recalling of waveform data, setups, and screenshots on a USB flash drive
Standard LAN (supports SCPI) and USB device port (USBTMC compliant) for remote PC control
WaveXpress Compatible Instrument Download waveforms from B&K oscilloscopes, AWGs, or load them from CSV/text files.
美国额外选配件
USB-to-GPIB Adapter
Model AK40G
The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.
Powered through USB host connector
Cable length approximay 56 inches (143cm)
Communication Status LED and Power LED indicators
GPIB interface supports Device mode only (not Controller mode)
General Purpose BNC and N Adapter Kit
Model CC500
General Purpose BNC & N Type Adapter Kit provides a comprehensive range of in-series and between-series BNC and N Type coaxial adapters for basic RF testing and troubleshooting needs. The 12 piece kit, packaged in a convenient foam-lined storage case for easy selection and use, is ideal for all popular instruments. The kit contains the most commonly used BNC and N Type adapters for everyday testing. All components feature 50Ω impedance, gold plated center contacts, and low VSWR to ensure accurate repeatable measurements. Features: BNC & N Type 50Ω Connectors Gold plated center contacts Storage case Applications: Production Testing Stations Service & Repair Facilities Educational Test Benches
General Purpose SIgnal Interconnect Kit
Model CC510
Model CC510 General Purpose Function Generator and Oscilloscope Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50 ohm impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use. Features: BNC & N Type 50 ohm Connectors Gold plated center contacts Storage case Applications: Production Test Stations Service & Repair Facilities Educational Test Benches
300 kHz AC/DC Oscilloscope Current Clamp Probe
Model CP62
The CP62 current probe allows a general purpose oscilloscope to display AC and DC current signals up to 100 A Peak (70 A RMS). The CP62 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory TL62 (BNC-to-banana) plug adapter.
50 mA to 100 A peak
DC to 300 kHz
RF Detector Probe
Model PR 32A
Usable with most oscilloscopes. Features light weight design and 48" (1.2m) coaxial cable. 100KHz to 950MHz Bandwidth +3dB Accuracy 200V Max input voltage 50VeffHF Voltage 250mV Actuating voltage 5pF Input capacitance Cable Length: 1.2 meters
High-Voltage Oscilloscope Probe, 10 kV, 40 MHz
Model PR-55
If the voltages you need to measure on your oscilloscope are above the specifications of the general purpose probe, B+K Precision has higher voltage probes for you. X1000 Attenuation 100 Mohms / 1 pF Input Impedance 40 MHz Bandwidth 80" (2.0m) Cable Length
25 MHz Active Differential Probe
Model PR-60
General Purpose digital storage oscilloscope active differential probe with 10x and 100x attenuation ranges and voltage measurements up to ±700 V. Bandwidth to 25 MHz. Powered by 4 AA batteries or optional 6 V DC mains adapter.
Applications include:
Switching power supply designs
Motor drive design
Electronic ballast design
CRT display design
Features:
Up to ±700 V differential and common mode
25 MHz bandwidth (-3 dB)
Safety certified
Accessories: Spring loaded hook probes, 4 AA batteries, rubber boot & manual
150 MHz 1x/10x Oscilloscope Probe
Model PR150B
17/150 MHz Bandwidth
X1/X10 Attenuation
47" (1.2m) Cable length
300 V CAT II
Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter
200 MHz 2 kV Oscilloscope High Voltage Probe
Model PR2000B
If the voltages you need to measure are above the specifications of the general purpose probe, B&K Precision has higher voltage probes for you.
X100 Attenuation
100 Mohms / 5 pF Input Impedance
200 MHz Bandwidth
250 MHz 10x Oscilloscope Probe
Model PR250B
250 MHz Bandwidth
X10 Attenuation
48" (1.2m) Cable length
Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter
500 MHz 10x Oscilloscope Probe
Model PR500B
500 MHz Bandwidth
X10 Attenuation
48" (1.2m) Cable length
Includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter